This heating platform for SMT component soldering adopts tubular electric heating elements as heat sources. After mold casting with premium aluminum alloy and precision machining, the heating surface is smooth and free of casting defects, enabling tight fitting with heated workpieces. The surface load of the aluminum heater can reach 1–3 W/cm², with an operating temperature range from ambient up to 350℃. It is a high-efficiency heater with uniform heat distribution. The high thermal conductivity aluminum alloy ensures consistent surface temperature and minimal temperature difference across the plate. Featuring long service life, excellent thermal insulation, robust mechanical performance, corrosion resistance and anti-magnetic properties, adding thermal insulation covers on radiating surfaces can reduce power consumption by approximately 30%.

1. Original domestic Yudian PID intelligent digital temperature control system with high precision, safe, simple and intuitive operation.
2. High-quality solid-state SSR relay with service life 100 times longer than ordinary contact relays. Fast response, high reliability, no operating noise, shock and mechanical impact resistance, excellent moisture-proof, mildew-proof and anti-corrosion performance.
3. Multiple premium stainless steel heating tubes filled with nichrome heating wire, superior thermal conductivity, easy maintenance and low failure rate.
4. Solid pure aluminum heating plate with outstanding thermal conductivity and uniform heat distribution. Heating efficiency is 5–6 times higher than conventional furnaces, free of deformation under prolonged high-temperature operation.
5. Full SUS304 stainless steel housing, no paint peeling or rusting under normal working environments.
6. Control cabinet equipped with cooling fans and ventilation windows to prevent overheating of internal components even under extreme working conditions.

1. Soldering and rework of aluminum substrates and LED chips in LED industry.
2. LCD screen, mobile touch screen repair, cable disassembly and adhesive removal for touch panels.
3. Laboratory heating plate for temperature testing, essential equipment for biological, genetic, medical, environmental, biochemical, analytical and university teaching laboratories.
4. Drying and baking of constant-temperature test samples in all industrial sectors.
5. Preheating, disassembly and rework of electronic components in electronics manufacturing industry.

Modular design for convenient maintenance. 304 stainless steel enclosure, one-piece 20mm thick machined aluminum plate, original Yudian temperature controller, Taiwan imported heating tubes and Yangming SSR relays; even all screws are stainless steel. As a direct manufacturer with 11 years of production experience, we adopt top-tier industry accessories, deliver stable quality and support continuous 24-hour operation.

1. Heater formed with special aluminum alloy for uniform and flat temperature rise.
2. LED digital display for plate temperature with accurate readings.
3. Fast and uniform heating, simple operation and safe to use.
4. Ambient working condition: -20℃ ~ +60℃, relative humidity ＜ 80%.
5. Dielectric strength: withstand 1500V 50Hz AC sine voltage test without breakdown within 1 minute.
6. Leakage current: ＜ 0.5 mA.
7. Insulation resistance: ＞ 2 MΩ.
8. Ground resistance: ＜ 0.1 Ω.
9. Power tolerance: +5% ~ -10%.

1. Wipe the working surface thoroughly before use; no water droplets, dust or foreign residues are allowed on the plate.
2. Place sample beakers or other containers on the heating plate.
3. Connect power and turn on the main switch. Press the SET key to enter temperature setting mode when digits flash. Press the ▲ key to increase value and ▼ key to decrease value; hold the key for fast adjustment. Press SET again to confirm and exit setting mode.
4. A dedicated operator must supervise the equipment during heating operation.
5. Turn off the power switch and cut off power supply completely after finishing work.